Since 1950
Home Categories Cabinetmaker Tatebiki Saw 180mm Razorsaw 295

Manufactured by RAZORSAW, this Japanese “pull” stroke saw is our most popular model for general works in cabinetry and schools, particularly for dovetails making. It allows better control and an increased accuracy with the lowest effort.

  • It is a more compact model with a 180mm (7") long blade that makes it easier to store in a toolbox
  • Equipped with a rigid backsplash that is intended primarily to facilitate guidance and to better support its fine blade
  • The Tatebiki type is characterized by a backsplash covering only 80% of the blade to allow for deeper cuts during ripping operations
  • The thin 0.3mm thick removable blade has a 17t/in (pitch=1.5mm) cutting edge, allowing it to make a thin clean cut
  • The blade is coated with micro-thin nickel to prevent rust and tarnish
  • It is fixed to an elastomer (EVA) wrapped handle that makes the grip more comfortable when working conditions are either very hot or very cold

RAZORSAW: the best pull saw in the world!



You may also be interested in the following product(s)

    Reg.$37 99
    180mm Dozuki japanese saw long back Razorsaw 297
    180mm Dozuki japanese saw long back Razorsaw 297
    Reg.$50 99
    Cabinetmaker Tatebiki Saw 240mm Razorsaw 307
    Cabinetmaker Tatebiki Saw 240mm Razorsaw 307
    Reg.$58 99
    Cabinetmaker Dozuki Saw 240mm Razorsaw 371
    Cabinetmaker Dozuki Saw 240mm Razorsaw 371

A word from the boss 

WMS-2019: Mission accomplished! (19-11-07)

Once again this year, Normand participated in the WMS-2019 National Fair, the most important industrial fair intended exclusively for the Canadian secondary wood processing industry.

Normand was again one of the major exhibitors of this major biannual exhibition, which was held from October 2 to November 1 at the International Center in Toronto.

Our participation was summed up as follows: 750 000 dollars of equipment carried in four 53ft trailers and demonstrated on 3100 ft² of floor space thanks to the support of a team of 25 people.

In addition to some of the state-of-the-art equipment showed, we took the opportunity to spread the full range of Steel City™ machines (more than 50 models) thus confirming the important place acquired by this brand in recent years.

In short, this major investment and the results that should result from it allow us to say: Mission accomplished!

Click here to take a look at the pictures