Since 1950
Home Categories Digital measuring instruments set CMT DMS001

This set included : 

Digital Height Gauge

Designed for setting router bit and shaper cutter heights, this digital gauge can also be very useful for settings on a bandsaw, jointer, shaper or table saw. Among other features:

  •  Digital easy to read display that can be reset as necessary
  • Can be used in absolute mode from zero point (ABS) or increment mode (INC)
  • 3 scales: can switch from fractional to decimal in mm or in inch with 0,10mm (0.004") accuracy
  • Self-standing with magnets, it offers a wide opening of 60mm (2-23/64")
  • Measuring range goes from 0 to 80mm (3-1/8")
  • Can measure in vertical or horizontal position
  • Supplied with extension probe for measuring depth
  • Battery CR2032 with 1500 hours life is included

Digital Angle Gauge:

  • The digital angle gauge is a mini waterproof digital protractor that provides digital readings between ±180° with a resolution of 0,1° and auto shut off after 5 minutes. It is small enough to be carried around in a pocket and the LED screen is convenient to read. It incorporates magnets in the base for adhesion to any ferrous surface to accurately measure mitre and bevel angles on mitre saws, saw benches, etc.

Digital Angle Finder

  • This digital angle finder is a multi-functional tool for many measuring applications. Easy to operate the base unit carries the electronics giving a very clear detailed LCD display as well as a pair of levelling vials and a pivoting measuring arm. When the arm is extended the angle it makes with the base is indicated clearly on digital read-out to the nearest 0,05°. The measuring range is 0 - 360°. The vials allow variations from the vertical and the horizontal to be accurately measured. Other features include a lock function to prevent the last measurement being lost, a low battery indicator and automatic shut off function. Being robust but light in weight this is a very well thought out tool with a lot of uses. Instructions included.

A word from the boss 

Back to school, in the workshop! (18-09-01)

Summer 2018 was memorable in terms of the heat and good weather. Sometimes, maybe a little too hot to work outside but certainly very nice for leisure activities.

Hoping that you've had time to complete all your outdoor endeavors, it is already time to start thinking about new projects in the workshop.

Some housekeeping, storing, positioning and, perhaps, planning the acquisition of new equipment?

In the coming months, the Boss invites you to follow his weekly specials where you can still find many novelties.

Welcome back!