Normand

Since 1950
Home Categories Pneumatic equipment 3 Tool Pneumatic Finish Kit Senco 1Y0060N
Description

It was in 1951 that the Senco brand definitely took off under the appearance of a pneumatic stapler invented to facilitate the installation of automotive headliner at the General Motors plant. Gradually, the Senco brand settled as the reference in many sectors of the industry, especially in the woodworking and construction sectors.

To start the New Year, the Boss has discovered this 3 tool pneumatic finish kit ( 2 nailers + 1 stapler) that will not only save you money but will allow you to start and finish any job by providing you with the right tool for the right use.

All 3 tools come in a rugged and convenient storage bag equipped with interior dividers for each tool as well as 10 exterior storage pouches for accessories and fasteners:

FinishPro35 - 2-1/2" Finish Nailer

  • Drives 15 gauge angled nails from 1-1/4"(32mm) to 2-1/2"(64mm) long => use ‘DA’ nails
  • Tool-free adjustable depth-of-drive
  • Practical easy-clear front latch that virtually eliminates downtime caused by a fastener jam
  • Contact trigger (must press the safety tip against the work and pull simultaneously the trigger)
  • Adjustable top exhaust to keep oil off the woodwork
  • Removable no-mar pad and rear bumper to protect work finish
  • Stretch on comfort grip
  • Loading capacity: 100 nails
  • Air consumption: 3.2cfm
  • Weight: 4.2lbs(1,9kg)

FinishPro18 - 2" Brad Nailer

  •  Drives 18 gauge brad nails from 5/8"(16mm) to 2"(51mm) long => use ‘AX’ nails
  • Tool-free adjustable depth-of-drive
  • Narrow nose design that facilitates access to tight corners
  • Sequential trigger (press the safety tip against the work, then pull the trigger to fire)
  • Rear exhaust to keep oil off the woodwork
  • Removable no-mar pad and rear bumper to protect work finish
  • Stretch on comfort grip and belt hook
  • Loading capacity: 100 nails
  • Air consumption: 2.4cfm
  • Weight: 2.5lbs(1,1kg)

SLS18 - 1-1/2" Stapler

  • Drives 18 gauge 1/4" staples from 1/2"(12mm) to 1-1/2"(38mm) long => use ‘L’ staples
  • Tool-free adjustable depth-of-drive
  • Narrow nose design that facilitates access to tight corners
  • Sequential trigger (press the safety tip against the work, then pull the trigger to fire)
  • Rear exhaust to keep oil off the woodwork
  • Removable no-mar pad and rear bumper to protect work finish
  • Stretch on comfort grip and belt hook
  • Loading capacity: 100 staples
  • Air consumption: 2.4cfm
  • Weight: 2.6lbs(1,2kg)

A word from the boss 

WMS-2019: Mission accomplished! (19-11-07)

Once again this year, Normand participated in the WMS-2019 National Fair, the most important industrial fair intended exclusively for the Canadian secondary wood processing industry.

Normand was again one of the major exhibitors of this major biannual exhibition, which was held from October 2 to November 1 at the International Center in Toronto.

Our participation was summed up as follows: 750 000 dollars of equipment carried in four 53ft trailers and demonstrated on 3100 ft² of floor space thanks to the support of a team of 25 people.

In addition to some of the state-of-the-art equipment showed, we took the opportunity to spread the full range of Steel City™ machines (more than 50 models) thus confirming the important place acquired by this brand in recent years.

In short, this major investment and the results that should result from it allow us to say: Mission accomplished!

Click here to take a look at the pictures