Normand

Since 1950
Home Categories Shop machines Table saws

Table saws

Set Descending Direction

1-12 of 30

Page:
  1. 1
  2. 2
  3. 3
Reg.$2,291 00
 1.75 hp Contractor Cabinet Saw with 30" fence SawStop CNS175A30
1.75 hp Contractor Cabinet Saw with 30" fence SawStop CNS175A30
Reg.$219 99 Promo $197 00
Precision Miter Gauge Kreg KMS7102
Precision Miter Gauge
Kreg KMS7102
Reg.$6,866 00
7,5 hp 480V Industrial Cabinet Saw with 52" fence SawStop I73480T52
7,5 hp 480V Industrial Cabinet Saw with 52" fence SawStop I73480T52
Reg.$6,733 00
7,5 hp 480V Industrial Cabinet Saw with 36" fence SawStop I73480T36
7,5 hp 480V Industrial Cabinet Saw with 36" fence SawStop I73480T36
Reg.$6,199 00
5 hp 480V Industrial Cabinet Saw with 52" fence SawStop I53480T52
5 hp 480V Industrial Cabinet Saw with 52" fence SawStop I53480T52
Reg.$6,066 00
5 hp 480V Industrial Cabinet Saw with 36" fence SawStop I53480T36
5 hp 480V Industrial Cabinet Saw with 36" fence SawStop I53480T36
Reg.$2,999 99
10" Industrial Table Saw Steel City 10-500 T4
10" Industrial Table Saw
Steel City 10-500 T4
Reg.$2,899 99
10" Industrial Table Saw Steel City 10-500 S3
10" Industrial Table Saw
Steel City 10-500 S3
Reg.$2,299 99
10" Professional Table Saw Steel City 10-300 S2
10" Professional Table Saw
Steel City 10-300 S2
Reg.$11 99 Promo $10 95
Push Stick Bracket Centurion 92-102
Push Stick Bracket
Centurion 92-102
Reg.$7 99 Promo $6 25
Push Stick Centurion 92-100
Push Stick
Centurion 92-100
Reg.$19 99 Promo $14 95
Push Stick + Bracket Set Centurion 92100W
Push Stick + Bracket Set
Centurion 92100W

Set Descending Direction

1-12 of 30

Page:
  1. 1
  2. 2
  3. 3

A word from the boss 

WMS-2019: Mission accomplished! (19-11-07)

Once again this year, Normand participated in the WMS-2019 National Fair, the most important industrial fair intended exclusively for the Canadian secondary wood processing industry.

Normand was again one of the major exhibitors of this major biannual exhibition, which was held from October 2 to November 1 at the International Center in Toronto.

Our participation was summed up as follows: 750 000 dollars of equipment carried in four 53ft trailers and demonstrated on 3100 ft² of floor space thanks to the support of a team of 25 people.

In addition to some of the state-of-the-art equipment showed, we took the opportunity to spread the full range of Steel City™ machines (more than 50 models) thus confirming the important place acquired by this brand in recent years.

In short, this major investment and the results that should result from it allow us to say: Mission accomplished!

Click here to take a look at the pictures