Normand

Since 1950
Home Categories Specialities Working stands Centipede® Multipurpose Support Bora
Description

Often called millipede, the centipede can have up to a maximum of 15 pairs of legs. Fleeing the light, its presence in homes will greatly depend on the level of moisture of the place. Although it may seem disgusting, it is a very clean insect that eliminates a bunch of other nasty insects in its entourage.

If there is some association between the centipede “insect” and the centipede “support” offered by Bora, it is mainly limited to the legs.

The Bora Centipede® multipurpose support is not only the solution for many workers; it can be the answer to the countless needs of any kind as well. Whether in the workshop, on site or at home, the Centipede® support will adapt to all your needs

  • Supplied in a practical carrying bag, it takes little space and installs in a snap. Its ease of installation is amazing. Let it unfold on a flat surface and voila
  • At first sight, it may look flimsy. But once deployed with a panel or some planks installed on it, it shows a remarkable solidity. The larger the surface, the more weight it can support
  • Made of heavy duty steel, the legs and the struts are flexible enough to absorb the impact from heavy objects and durable enough to ensure smooth and long-lasting use
  • Each touch point is fitted with a rotating P-Top made of polymer which does not mark and rotates 360 degrees to accommodate various accessories available and adjust to the temporary needs of the time
  • It includes 4 X- Cups designed to accept a 2' x 4' as well as quick clamps, hooks and others
  • It offers a 30"(760mm) height of use making it ideal to quickly prepare a work surface or a demo or side table

Available in three sizes:

BORCK06S - 2’ x 4’ Centipede® Support

Small 6 leg model including 2 quick clamps. It weighs 13 lbs (6kg) and has a carrying capacity of 2500 lbs (1100kg)

BORCK09S - 4’ x 4’ Centipede® Support

Medium 9 leg model including 4 quick clamps. It weighs 19 lbs (9kg) and has a carrying capacity of 3500 lbs (1500kg)

BORCK15S - 4’ x 8’ Centipede® Support

Large 15 leg model including 4 quick clamps. It weighs 31 lbs (14kg) and has a carrying capacity of 6000 lbs (2700kg)

Video

You may also be interested in the following product(s)

    Reg.$31 99
    Quickcut™ Saw Cutting Guide Bora 530416
    Quickcut™ Saw Cutting Guide Bora 530416
    Reg.$11 99
    Non-slips (6) for Centipede Bora 0606
    Non-slips (6) for Centipede Bora 0606
    Reg.$6 99
    Hook (2) for Centipede Bora 0402
    Hook (2) for Centipede Bora 0402
    Reg.$5 99
    X-Cups (2) for Centipede Bora 0202
    X-Cups (2) for Centipede Bora 0202
    Reg.$25 99
    WTX Rip Guide Bora 542007
    WTX Rip Guide Bora 542007
    Reg.$22 99
    Risers (6) for Centipede Bora 0506
    Risers (6) for Centipede Bora 0506
    Reg.$7 99
    Quick clamps (2) for Centipede Bora 0302
    Quick clamps (2) for Centipede Bora 0302
    Reg.$7 99
    P-Tops (3) for Centipede Bora 0103
    P-Tops (3) for Centipede Bora 0103

A word from the boss 

The Boss found winter long... (19-05-14)

The first snow storm hit us on November 10 and the Boss remembers because he had to finish his autumnal outdoor work in the snow. Since then, the snow and cold settled in and lasted until the end of April. Almost 6 months…

Winter has been long for all but, nevertheless, has had a positive effect on the growth of our internet sales. Woodworkers have used this indoor time to properly equip themselves and keep busy. For those who have not yet completed their projects, there is still two months before closing up shop for some well-earned vacation time.

For the others, like the Boss, have your bicycle tuned and get some fresh air.