Normand

Since 1950
Home Switch-Breaker Autoswitch i-Socket 120010
Description

Sick and tired of having to do the same routine: start the vacuum, start the saw, make the cut, stop the saw and stop the vacuum? Now with the switch-breaker Autoswitch, no need to bother anymore with the vacuum. 

Specifically designed for the combined use of tool and standard shop type vacuum, this “intelligent” switch will control the in rush of current start up, thus eliminating circuit breaker overload.

  • Measuring 4"(100mm) x 2"(50 mm) x 3"(75 mm), it is equipped with a software imbedded microcontroller and needs to be plugged into a standard 15A/110V outlet.
  • Any tool with a 15A/110V (1875 Watts) maximum motor rating can be plugged in: portable or contractor table saw, miter saw, portable planer, router, sander, work lamp or others.
  • Any vacuum that does not exceed 15A/110V (1875 Watts) can be plugged in: wet/dry vacuum, dust collector and even power feeder.
  • The vacuum switch must be in the ON position for auto-start up.
  • One only has to power the tool ON and the vacuum will automatically start.
  • Power the tool OFF and the vacuum will continue running for 7 seconds to clean out the pipe, then automatically cycle down and sit in the ready state until the next use.

Good way to increase efficiency and focus on you work!

Video

A word from the boss 

Ready for woodworking season? (19-09-12)

A few years ago, the return of the woodworker to his shop coincided with back to school time.

This is no longer the case today. Summer is getting longer and we seize the opportunity to complete some outdoor work.

But it is never too early to plan your return to the workshop because, one day or another, nature will send you back in.

And the Boss will be there to provide you with ideas!

Have a great woodworking season!